HUBUNGAN ANTARA PPE, WPS, BBS DAN KOMPETENSI WELDER TERHADAP PENERAPAN K3 BIDANG PEKERJAAN FABRIKASI LOGAM PADA PROSES WELDING
DOI:
https://doi.org/10.35328/kesmas.v13i2.2799Keywords:
Personal Protective Equipment (PPE), Welding Procedure Standard (WPS), Behavior Based Safety (BBS), Welder CompetenceAbstract
Welding is a high-risk job due to involving heat and electricity. To ensure the safety of workers at CV. Bengkel Las Adi Jaya, it is crucial to pay attention to the use of Personal Protective Equipment (PPE), the implementation of Welding Procedure Standard (WPS), Behavior Based Safety (BBS), and the competence of welders. This study aims to determine the correlation between the effectiveness of using Personal Protective Equipment (PPE), Welding Procedure Standard (WPS) specifications, Behavior Based Safety (BBS), and welder competence with the implementation of Occupational Safety and Health (OSH) in the welding process at Bengkel Las Adi Jaya. This is a quantitative analytical method with a cross-sectional design. The results showed a significant correlation between the effectiveness of using Personal Protective Equipment (PPE) with a p-value of 0.041, the implementation of WPS with compliance with OSH practices with a p-value of 0.000, and Welder Competence with a p-value of 0.039. However, no significant relationship was found between behavior-based safety (BBS) and OSH compliance. This study highlights the important role of technical factors such as PPE, WPS, and Welder Competence in ensuring workplace safety. This study recommends increasing the use of PPE, strict adherence to WPS, and continuous skill improvement for welders to create a safer working environment
References
Arsyad, M., Halik Razak, A., Hasyim, & Hasil. (2019). Penerapan K3 Dalam Proses Pengelasan. Prosiding Seminar Nasional Penelitian & Pengabdian Kepada Masyarakat, 2019, 31–34. http://jurnal.poliupg.ac.id/index.php/snp2m/article/view/1617/1477
Arvianti, P. F., Suroto, & Ida, W. (2019). Hubungan masa Kerja Antara Pengetahuan, Praktik Penerapan SOP, Praktik Penggunaan APD dan Komitmen Pekerja dengan Risiko Kecelakaan Kerja di PT X Tangerang. Kesehatan Masyarakat, 5(3), 9–25.
Hariyono, W. (2016). Standar Operasional Prosedur Bidang €Œk3€ Pada Unit Sarana Pt. Kereta Api Indonesia (Persero) Daerah Operasi 6 Yogyakarta. Teknoin, 22(7), 540–550. https://doi.org/10.20885/teknoin.vol22.iss7.art8
Hiperkes RI. (2005). Keselamatan dan Kesehatan Kerja. In Himpunan Peraturan Perundangan Keselamatan Dan Kesehatan Kerja (K3) Ri (Vol. 1, pp. 1–793).
Industrial Safety and Higiene News. (2017). OSHA Welding, Cutting and Brazing. https://www.ishn.com/articles/105573-osha-welding-cutting-and-brazing-1910252
Kanaf, Y. R., Foeh, J. E. H. J., & Manafe, H. A. (2023). Pengaruh Kesehatan Keselamatan Kerja (K3), Kompetensi dan Lingkungan Kerja terhadap Kinerja Tenaga Kerja Melalui Kepuasan Kerja sebagai Variabel Mediasi (Kajian Studi Literatur Manajemen Sumber Daya Manusia). Jurnal Ilmu Terapan , 4(6), 886–897. https://creativecommons.org/licenses/by/4.0/
KEementerian Ketenagakerjaan R.I. (2018). Membuat Sambungan Las Kampuh (Groove) Sesuai Welding Procedure Specification (Wps) Untuk Pengelasan Pelat Ke Pelat Dan Sesuai Dengan Proses Las Yang Digunakan C.24Las01.029.1. 2018, 1–81. https://blkserang.kemnaker.go.id/digilib/index.php?p=fstream-pdf&fid=239&bid=75
Khushartanto, P. (2018). Membuat Sambungan Las Kampuh ( G Roove ) ( Wps ) Untuk Pengelasan Pelat Ke Pelat Dan. In Jurnal CRANKSHAFT: Vol. Vol. 2 No. (pp. 1–81).
Meyninta, H., Ginting, B., Sari, C. P., Br, T. R., Reswidhanita, T. K., Ferozayanti, N., Malik, A. R., & Isabella, M. (2024). Analisis Perilaku Keselamatan dan Kesehatan Kerja pada PT . Sigma Quantum Insani melalui Pendekatan Behavior Based Safety ( BBS ). 4(4), 909–918.
Muharani, R., D. (2019). Factor Related To The Incidence Of Workplace Accidents To workers In The Production. Journal of Public Health Research and Community Health Development, 2(3), 122–130.
Mukhtar, M. N. A., W, A. J. A., & Febryanto, I. D. (2023). PROSES MANUFAKTUR ECO. CV Pena Persada. https://books.google.co.id/books?id=f2PNEAAAQBAJ
Nofiar, N., Maswarni, M., & Susanti, N. (2021). Pengaruh Kompetensi Terhadap Kinerja Karyawan Pt. Wisesan Jaya Makmur Kota Tangerang. SCIENTIFIC JOURNAL OF REFLECTION : Economic, Accounting, Management and Business, 4(4), 842–849. https://doi.org/10.37481/sjr.v4i4.401
Pratiwi, A. T. N. (2023). FAKTOR YANG BERHUBUNGAN DENGAN PERILAKU K3 PADA TENAGA KERJA DI PT. ANTAM Tbk UBPN KOLAKA AREA SMELTING TAHUN 2022. 5(2), 31–41.
safety sign. (2016). Bahaya Asap Pengelasan Bisa Timbulkan Deretan Penyakit Ini, Penting Diwaspadai Pekerja Las. https://www.safetysign.co.id/news/Bahaya-Asap-Pengelasan-Bisa-Timbulkan-Deretan-Penyakit-Ini-Penting-Diwaspadai-Pekerja-Las
Suheri Jumartika, Abd. Gafur, & Rahman. (2021). Analisis Risiko Pada Pekerja Pengelasan (Welding) di PT. Industri Kapal Indonesia (Persero) Kota Makassar. Window of Public Health Journal, 2(2), 328–338. https://doi.org/10.33096/woph.v2i2.162
Suroso, H. C., & Yanuar, K. E. (2020). Analisa Potensi Bahaya pada Perusahaan Fabrikasi Baja menggunakan Metode HAZOP (Hazard and Operability Study). Journal of Advances in Information and Industrial Technology, 2(1), 13–21. https://doi.org/10.52435/jaiit.v2i1.16
Tanjung, R., Syaputri, D., Rusli, M., Sinaga, J., Manalu, S. M., Bambang, T. T., & Lubis, A. Z. (2022). Analisis Faktor Kecelakaan Kerja pada Pekerja Usaha Bengkel Las. Formosa Journal of Science and Technology, 1(5), 435–446. https://doi.org/10.55927/fjst.v1i5.1229
Tarwaka. (2012). Dasar- dasar Keselamatan kerja serta pencegahan kecelakaan di tempat kerja. Harapan Press.
Utami, A. R. D. (2020). Terapan Standar Operasional Prosedur Keselamatan dan Kesehatan Kerja. Higeia Journal Of Public Health Research And Development , 4(Special 1), 5. http://journal.unnes.ac.id/sju/index.php/higeia
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Al-Tamimi Kesmas: Jurnal Ilmu Kesehatan Masyarakat (Journal of Public Health Sciences)
This work is licensed under a Creative Commons Attribution 4.0 International License.
